We are committed to the scholarship of discovery as it contributes to the institution’s academic advancement.
EIT focuses on the delivery of programs relevant to today’s industry needs. Consequently, we seek that our scholar research:
- includes original research that advances knowledge;
- synthesizes information across topics, disciplines and/or time; and,
- is presented in a format that will allow evaluation by others through public sharing.
Furthermore, EIT’s scholar research activities expand to ensure the inclusion of the reality of contemporary life, such as sponsoring technical conferences and events that bring together relevant industry experts and professionals to share their knowledge and industry experience in an effort to advance their particular fields.
Effect of heat treatment on mechanical and tribological properties of aluminum metal matrix composites
Dr Manu Sam27 April, 2020
LM25 aluminum alloy reinforced with 10 wt% of TiB2, WC, and ZrO2 were squeeze cast to investigate the effect of T6 heat treatment on tribo-mechanical properties. Among all, WC-reinforced composite achieved superior mechanical properties at the aging time of 8 h. Microstructural examination performed on all composites and alloy concluded that the presence...Read More
Deformation and toughness behavior of β -type titanium alloys comprising C15-type Laves phase
Dr Chirag Rabadia25 February, 2020
Laves phases are effective in tailoring the mechanical properties of alloys used for structural engineering applications. Therefore, it is an emerging research significance to investigate the deformation features of alloys comprising a Laves phase. In this work, the Ti–33Zr–xFe–yCr (x = 5, 7 wt% and y = 2, 4 wt%) alloys were designed in such a...Read More
Tribological and wear performance of centrifuge cast functional graded copper based composite at dry sliding conditions
Dr Manu Sam3 January, 2020
Non lubricated slide performance of functional grade copper matrix composite, fabricated using horizontal centrifuge cast technique was investigated using pin-on-disc tribo-tester. Rate of wear and friction coefficient of the inner wall thickness of hollow cylindrical cast specimen was analyzed using Taguchi based L27 orthogonal array, where the percentage of graphite particles...Read More
Experimental Studies on Mechanical and Wear Behaviour of TiC Reinforced Cu-Sn-Ni Functionally Graded Composite
Dr Manu Sam15 December, 2019
This research aims to fabricate Cu-10Sn-5Ni /10wt%TiC functionally graded composite (Øout100 X Øin70 X 100 mm) through horizontal centrifuge cast technique and to study its tribo-mechanical characteristics. Microstructural observation revealed higher percentile of reinforcement particles at inner wall zone compared to middle and outer zones. Vicker’s micro hardness tests revealed...Read More
Recycled ceramic fine aggregate for masonry mortar production
Dr Ana Evangelista6 September, 2019
Construction and demolition waste is composed of fragments of ceramic tiles, steel, wood, plaster, glass, concrete and mortar. Reduction and reuse of this waste can minimise the consumption of natural resources and energy in the construction industry. In addition, high population growth followed by a large housing deficit in many...Read More
Improved trade-off between strength and plasticity in titanium based metastable beta type Ti-Zr-Fe-Sn alloys
Dr Chirag Rabadia26 August, 2019
An impressive strengthening ability of Laves phases is favorable to develop titanium alloys with an improved trade-off between strength and plasticity. Therefore, the Ti-xZr-7Fe-ySn (x = 25, 30, 35 wt% and y = 1, 2 wt%) alloys were first designed in such a manner that a Laves phase would precipitate in these alloys and then the investigated alloys...Read More
A novel settling tank for produced water treatment: CFD simulations and PIV experiments
Harisinh Parmar20 August, 2019
Removal of solids is a critical step in the treatment of produced water generated by offshore hydrocarbon exploration. Present work evaluates a new design of a settling tank that can be used for continuous separation of fine particles from produced water. The novelty of the design lies in its ability generate...Read More
Characterization of centrifuge cast TiC reinforced functional grade composite of copper
Dr Manu Sam31 July, 2019
This research analyses physical and anti-wear properties of a functional grade Cu–Ni–Si/TiC, manufactured using horizontal- centrifuge cast process. The microstructural analysis conducted radially at wall thicknesses 1, 8 and 13 mm from outer, showed an increasing gradient of particle distribution providing 41% improved hardness at the inner p eriphery and...Read More
Comparative study between tribological performance of carbide reinforced functionally graded copper composite and its alloy under the influence of process parameters
Dr Manu Sam26 July, 2019
The functionally graded composite Cu-10Sn-5Ni/10 wt% B4C and its alloy, was manufactured (Φout100 × Φin85 × 100 mm) by stir casting route utilizing horizontal centrifuge cast technique. A comparative dry sliding tribological analysis was performed for interior (1–5 mm), intermediate (5–10 mm) and exterior (10–14 mm) zones of both composite and alloy, using pin-on-disc...Read More
Mechanical and tribological analysis of functionally graded aluminium hybrid composite using RSM approach
Dr Manu Sam24 July, 2019
Functionally graded LM14 Al/12Si3N4/3Gr hybrid composite was developed through horizontal centrifugal casting with a wall thickness of 15 mm. Mechanical analysis like Vickers hardness (27%) and tensile strength (3%) were observed superior at Si3N4 rich outer zone than Gr rich inner zone. Rate of wear of Gr rich inner specimen (8–13...Read More