A giant boat lift that uses surprisingly little electricity. Concrete that can seal small cracks. A landmark that leans away from the sun. These engineering facts may sound invented, but each has an explanation grounded in science.
These examples show how engineers apply scientific principles in unexpected ways. Balance can reduce the energy needed to move something enormous. Carefully chosen materials can react to damage. Even the way time passes becomes a practical design consideration.
Here are five examples, with the science explained in everyday language.
1. A Giant Boat Lift Can Turn Using the Energy to Boil Eight Kettles
Scotland’s Falkirk Wheel carries boats between waterways at different heights. Despite its enormous size, Scottish Canals puts its electricity use at about 1.5 kilowatt-hours per rotation, roughly the energy needed to boil eight household kettles., roughly the energy needed to boil eight household kettles.
The secret is balance. One water-filled tank rises while the other descends, so their weights counterbalance each other.
Adding a floating boat does not simply add its weight to a full tank. As it enters, the boat displaces water equal to its own weight. With water levels controlled, the two sides remain balanced.
The motors still need energy to overcome friction and control movement.
However, the arrangement greatly reduces the work they must do. The kettle comparison refers specifically to turning the wheel.
2. Some Concrete Can Seal Its Own Cracks
A crack in concrete usually calls for repair, since its damages are permanent. But there are certain concrete mixtures that have an additional trick: ingredients that help seal small cracks when water enters.
In a 2023 study published in Science Advances, researchers investigated calcium-rich lime fragments in ancient Roman concrete. They then developed modern mixtures inspired by the material and tested their ability to close cracks.
Water reaching the exposed fragments can dissolve calcium, which can form calcium carbonate, a mineral that fills the gap. In laboratory samples, the team observed sealing of cracks about 0.5 millimeters wide.
The finding offers a possible way to limit water entering concrete through small cracks. Its demonstrated benefit was crack sealing under controlled conditions; assessing the strength of a damaged structure remains a separate engineering task.
3. Your GPS Depends on Clocks That Tick Differently in Space
The map on your phone relies partly on a fact that sounds like science fiction: clocks aboard GPS satellites tick at a different rate from clocks on Earth.
Engineering professionals account for these effects, described by Einstein’s theories of relativity, to keep the system accurate.
4. The Eiffel Tower Leans Away from the Sun
Sunlight can make the Eiffel Tower lean slightly.
The reason is thermal expansion: iron expands as it warms. When sunshine heats one side of the tower more than the others, that side expands more, causing the structure to tilt away from the sun.
According to the Eiffel Tower’s operator, the sun’s movement over a clear day can cause the summit to trace a roughly circular path about 15 centimeters across.
The movement is too small for visitors to notice and is a natural response to temperature changes.
The tower also becomes slightly taller as it warms and contracts as it cools.
For engineering professionals, it illustrates why a structure’s behavior must be considered across changing temperatures.
5. A 660-Metric-Ton Ball Helps Keep a Skyscraper Steady
High inside Taipei 101 hangs a gold-colored steel sphere weighing 660 metric tons and measuring about 5.5 meters across.
According to Taipei 101, the sphere forms part of a tuned mass damper, a system that reduces swaying in strong winds and helps keep occupants comfortable.
As the tower sways, the suspended mass moves relative to it. Hydraulic dampers resist that movement and dissipate energy, helping reduce the building’s motion. Their role is similar to shock absorbers, which help settle movement after a disturbance.
The mass and its movement must be carefully matched to the structure’s behavior. As damper designer Motioneering explains, these systems are tested and tuned to control unwanted motion.
These examples connect to subjects studied across engineering, including mechanics, materials, structural behavior, and electronic systems. Explore the Engineering Institute of Technology (EIT)’s engineering study areas to see where those interests could lead.
This article was published November 16th, 2026 and the content is current as at the date of publication.