What does it take to troubleshoot industrial equipment beyond routine maintenance? For technicians, developing specialized process control skills can make the difference when dealing with more complex equipment faults.
This article explores three process control skills that technicians can develop through courses offered by the Engineering Institute of Technology (EIT) to strengthen their troubleshooting expertise and prepare for more advanced technical responsibilities.
Instrumentation Diagnostics
Industrial equipment relies on instruments such as pressure transmitters, temperature sensors, and flow meters to measure operating conditions.
These instruments send measurement data to control systems such as programmable logic controllers (PLCs) and distributed control systems (DCS), which use information to regulate equipment such as pumps and valves. However, inaccurate readings can trigger incorrect control responses, making it difficult for technicians to determine whether the problem originates from the instrument or the equipment itself.
For example, a faulty pressure transmitter in an industrial pumping system may report a pressure reading higher than the actual water pressure inside the pipeline. Based on this incorrect reading, the controller may reduce the pump speed, causing water pressure to drop further even though the pump itself is functioning properly.
Diagnosing this type of fault requires more than checking whether an instrument is functioning properly. Some measurement errors can go unnoticed because sensors continue producing readings that appear normal, even when the information they provide is inaccurate.
This is why a deeper understanding of measurement accuracy and signal behavior is important, as it helps technicians distinguish between faulty instrument readings and actual changes in process conditions. Misidentifying the source of a problem can lead to unnecessary equipment repairs or adjustments while leaving the underlying fault unresolved. Similar diagnostic challenges can arise with control valves, where incorrect positioning or actuator problems may affect process conditions even when instrument readings are accurate.
EIT’s Professional Certificate of Competency in Instrumentation, Automation and Process Control can help technicians build on their practical experience and progress from troubleshooting individual instruments to independently diagnosing more complex faults across interconnected measurement and control systems. The 52886WA Advanced Diploma of Industrial Automation Engineering* offers a pathway beyond troubleshooting, to develop the expertise to configure control systems and participate in commissioning industrial automation projects, such as automated manufacturing lines, water treatment facilities, and industrial process control systems.
PLC Logic Troubleshooting
PLCs are used in industrial automation to execute programmed instructions that control equipment operations. These instructions determine when machinery starts, stops, or changes its operating sequence based on signals received from sensors and other connected devices. However, when equipment fails to respond as expected, the problem may originate from the programmed control sequence rather than a mechanical or electrical fault.
For example, a 2026 study titled “Analysis of PLC-Based Interlock Systems to Prevent Production Process Failures in Conveyor Lines,” examined the way programmed interlocks control conveyor operates in an industrial production line. Researchers tested a PLC-based system using photoelectric sensors to detect objects and trigger appropriate responses when disturbances occurred. The system responded correctly in eight out of ten test scenarios, including automatically stopping the conveyor and activating a warning alarm. This finding demonstrates why technicians need to examine PLC logic and input signals when troubleshooting unexpected equipment stoppages because the problem may involve an unmet operating condition rather than a faulty motor or electrical supply.
Troubleshooting these issues requires an understanding of the relationship between PLC input and output signals and programmed instructions, particularly when multiple operating conditions determine whether equipment can run.
EIT’s Professional Certificate of Competency in Programmable Logic Controllers (PLCs) and SCADA Systems can help technicians progress from resolving familiar control faults to independently investigating recurring PLC failures and SCADA communication problems. This expertise can be further strengthened through the Professional Certificate of Competency in Safety Instrumentation Systems for Process Industries, particularly when troubleshooting involves safety interlocks and protective functions that prevent equipment from operating under hazardous conditions.
Process Control Loop Analysis
Industrial control systems use feedback loops to maintain operating conditions such as temperature, pressure, and flow at their required setpoints. These loops continuously compare actual measurements against target values and adjust equipment such as control valves and pumps to correct deviations. However, equipment can remain operational while the process experiences unstable performance due to poorly tuned controllers, delayed equipment responses, or unauthorized changes to control settings.
For example, a 2026 study published in Electronics, titled “Malicious Manipulation of the Setpoint in the Temperature Control System of a Heating Process Based on Resistive Electric Heating,” examined how a cyberattack could interfere with an industrial heating system controlled by a proportional-integral-derivative (PID) controller. Researchers demonstrated that unauthorized changes to the temperature setpoint could cause the heating system to operate at temperatures different from those intended, while the readings displayed to operators appeared normal. This shows how a control system produces incorrect process conditions even when the heating equipment remains functional, making it difficult to distinguish between controller performance issues and cybersecurity-related interference.
Diagnosing these problems requires technicians to examine not only how a control loop responds to changing process conditions but also whether its operating parameters and control signals have been altered. This distinction is important because adjusting PID settings may address poor controller tuning but cannot resolve instability caused by unauthorized interference.
Developing expertise in process control analysis and industrial control systems cybersecurity can help technicians investigate the underlying causes of abnormal system behavior and identify appropriate corrective measures.
EIT’s Industrial Automation, Instrumentation and Process Control courses provide opportunities to develop expertise beyond routine equipment troubleshooting. With stronger knowledge of feedback control and process dynamics, technicians can progress toward evaluating control loop performance, supporting controller tuning, and contributing to process optimization initiatives that improve the reliability and efficiency of industrial operations.
VSL approved course, maximum tuition fee for Australian students: 12,112.00
References
Analysis of PLC-Based Interlock Systems to Prevent Production Process Failures in Conveyor Lines
Malicious Manipulation of the Setpoint in the Temperature Control System of a Heating Process Based on Resistive Electric Heating
Feedback Control Loops
This article was published November 17th, 2026 and the content is current as at the date of publication.