BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Engineering Institute of Technology - ECPv6.17.0//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Engineering Institute of Technology
X-ORIGINAL-URL:https://www.eit.edu.au
X-WR-CALDESC:Events for Engineering Institute of Technology
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:Australia/Perth
BEGIN:STANDARD
TZOFFSETFROM:+0800
TZOFFSETTO:+0800
TZNAME:AWST
DTSTART:20230101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Australia/Perth:20240809T080000
DTEND;TZID=Australia/Perth:20240809T170000
DTSTAMP:20240719T022950Z
CREATED:20240617T064850Z
LAST-MODIFIED:20240719T022950Z
UID:50073-1723190400-1723222800@www.eit.edu.au
SUMMARY:Static Electricity in Hazardous Area Workplaces: Ensuring Safety and Compliance
DESCRIPTION:Workshop Overview:\nJoin EIT and their sister company IDC Technologies for their workshop on Static Electricity in Hazardous Area Workplaces: Ensuring Safety and Compliance. \nDue to popular demand\, the SEC Managing Director\, Cem Novella\, will present a workshop on static electricity similar to that provided to the regulators in Victoria and NSW. \nThis workshop provides a rare opportunity to hear from one of Australia’s leading auditors and the Chair of the Australian Standards Committee EL-025 on conducting a static electricity assessment and what constitutes a static control plan. \nWhen you consider that static electricity is the cause of many Australian workplace injuries\, fires and explosions and more recently\, 2 fatalities in Victoria\, it is quite concerning that most Australian workplaces are unaware of their compliance requirements relating to Australian law and standards specific to static electricity control. \nIs your workplace compliant?\nDo not miss this workshop opportunity to take an in-depth look with one of Australia’s leading auditors and investigators of static electricity at a typical example of a hazardous area workplace to better understand compliance and non-conformance. Take this valuable knowledge back to your workplace and begin the important task of protecting your site from static electricity in accordance with Australian law and standards. \nThis workshop is hands-on. You will see examples of non-compliance specific to static electricity in hazardous area workplaces\, but more importantly\, you will learn how to identify them and apply the appropriate control. \nSee how a typical audit investigation applies specific tests to determine static electricity compliance. See what test equipment is used by the auditor to determine compliance. \nIf you are concerned about static electricity at your workplace or are undertaking a project and would like to better understand the hazard that static electricity presents. Don’t miss this workshop opportunity. \nFor more information about this workshop or to learn more about IDC Technologies Hydrogen Safety & Hazardous Areas Conference in Perth please click here.
URL:https://www.eit.edu.au/event/static-electricity-in-hazardous-area-workplaces-ensuring-safety-and-compliance/
LOCATION:Onsite
CATEGORIES:EIT Workshop,IDC Technologies Workshop
ATTACH;FMTTYPE=image/jpeg:https://www.eit.edu.au/wp-content/uploads/2024/06/EITIDC_HSHAWorkshop_Banner.jpg
END:VEVENT
END:VCALENDAR