On-Campus – Bachelor of Science (Civil & Structural Engineering)

CRICOS Course Code: 095812M

Course Duration
Duration
  • 36 Months
Course Study
Study Mode
  • On-Campus
  • Bachelors
  • On-Campus Civil Engineering
Course Location
Location
  • Perth
Course Code
Course Code
BCSOC
Course Intakes
Intakes
  • 24 February 2025
  • 4 August 2025
Course Type
Course Type
  • Bachelors
  • Civil Engineering
Course Fees
Fees
Domestic Per Year : AUD9,000.00
Domestic Total : AUD27,000.00
International Per Year : AUD25,850.00
International Total : AUD77,550.00

Course Overview

Civil engineers are responsible for ensuring that the infrastructure around us gets developed, is safe, meets our needs, and improves our quality of life. This includes buildings, bridges, railways, tunnels, water distribution, and waste management networks. This practical qualification will ensure you graduate job-ready as a civil and structural engineering technologist. Upon completion of this program, you will gain skills and knowledge in the latest and developing technologies in civil and structural engineering.

This course is internationally recognized under the Sydney Accord.

Program Details

Civil and structural engineering is one of the oldest forms of engineering which involves the design, construction, and maintenance of the built environment. Engineers in this field are responsible for ensuring that the infrastructure around us gets developed, is safe, meets our needs, and improves our quality of life. This includes buildings, bridges, railways, tunnels, water distribution, and waste management networks. As a civil engineer, you could be involved in sustainable urban development, environmental protection, conservation of energy and water resources, or even geotechnical, hydraulic, or transport engineering. You could even specialize in fields such as earthquake and blast-resistant technologies.

With this qualification, you will have acquired the essential knowledge which underpins both this and other fields of engineering. More importantly, you will have become a civil and structural engineering technologist.

The degree consists of a combination of common units, sub-discipline specific ‘stream’ units, industrial work experience, and a final year project. The program duration is three years full-time. We deliver units over two semesters per year, and you will take 4 to 5 units per semester. There will be a short mid-semester break and extended breaks between semesters. Please refer to the current teach-out program structure here.

Year One

Unit Code Subjects Credit Points
BSC101 Engineering Mathematics 1 3
BCS102 Construction Materials 3
BSC103 Engineering Physics and Materials 3
BSC104 Engineering Drawing and CAD 3
BSC105 Engineering Ethics and Professional Practice 3
BSC106 Engineering Mathematics 2 3
BSC107 Engineering Programming 3
BSC108 Engineering Statics 3
BSC109 Fluid Mechanics 3

Year Two

Unit Code Subjects Credit Points
BSC201 Engineering Management 3
BCS202 Construction Engineering 3
BCS204 Strength of Materials 3
BCS205 Engineering Surveying 3
BCS207 Soil Mechanics 3
BCS206 Hydraulics 3
BCS203 Introduction to Structural Analysis 3
BCS208 Design of Steel and Timber Structures 3
BCS209 Geotechnical Engineering 3

Year Three

Unit Code Subjects Credit Points
BCS301 Design of Concrete Structures 3
BCS302 Road Design 3
BCS303 Civil Design 3
TBA Elective-1 3
TBA Elective-2 3
BSC305 Technology, Sustainability and Society 3
BSC307 Engineering Capstone Project 9

Additional Mandatory Units

Unit Code Subjects Credit Points
Hands-on Workshop 1 0
BXX001-004 Hands-on Workshop 2 0
Hands-on Workshop 3 0
Hands-on Workshop 4 0
BSC210 Industrial Experience

List of Electives* (2 Electives to be selected)

Unit Code Subjects Credit Points
BSC202 Engineering Mathematics 3 3
BME302 Automation, Measurement and Control 3
BME303 Computer Aided Technology 3
BIA206 Data Analytics and Artificial Intelligence 3
BCS310 Design of Modular Construction 3
BCS311 Building Information Modelling 3
BSC102 Electrical Circuit Theory and Analysis 3
BME204 Machine Dynamics 3

Work-Integrated Learning

EIT’s Bachelor of Science programs require students to undertake 240 hours of paid or unpaid professional work-integrated learning. This can incorporate paid or unpaid internships, site visits, contributing to industry projects, and networking activities. In undertaking an internship, students will interact with employees and become exposed to organizational policy and culture. You will familiarize yourself with organizational communication procedures, a variety of engineering disciplines, and obtain insight and practical aptitude in projects from the planning phase to completion. If you already have some work experience in the relevant engineering field, you may apply to have credit granted by completing the associated recognition of prior learning form.

Bachelor of Science (Civil and Structural Engineering) – Mapping of Program Learning Outcomes with Graduate Attributes and Engineers Australia Stage 1 Competencies for Engineering Technologists.

The leader for this program is Dr. Shasha Wang

Entry is available to applicants who hold one of the following:
1. Year 12: Australian Senior Certificate of Education (or equivalent), completed within the past 3 years, with a minimum score of 60% in Maths;

  • Applicants who have completed Yr 12 (or equivalent) more than 3 years ago will also need to demonstrate relevant work experience in the field of study applied for.

2. A relevant (to the sub-discipline) Engineering AQF Diploma or higher or a relevant (to the sub-discipline) overseas qualification equivalent to an Engineering AQF Diploma or higher which was completed within the last 10 years with successful completion of all Maths units/modules + recent industry work experience in a relevant field.

English Language Proficiency Requirements:

Entry to this course requires demonstration of English language proficiency at the level of an IELTS overall score of at least 6.0 (with no individual band score less than 5.5)

The methods of satisfying this English language proficiency requirements are generally through (but not limited to):

  • An Australian Senior Certificate of Education or equivalent.
  • A specified level of achievement in a recognised English language test, such as IELTS (or equivalent).
  • Satisfactory completion of another tertiary course offered in English.
  • Work history in an organization where English is the language of communication.

NOTE: All CRICOS applicants from non-English speaking countries (as determined by the Australian Department of Home Affairs) are required to provide results from a recognised language test such as IELTS or equivalent.

NOTE: All applications will be assessed on a case-by-case basis.

Please check the Documentation Guidelines for your application.

For full current fees in your country go to the drop down filter at the top of this page or visit the Fees page.

Payment Methods

Learn more about payment methods, including payment terms & conditions and additional non-tuition fees.

Like all Australian higher education providers and universities, EIT programs are accredited by the exacting standards of the Australian Government’s Tertiary Education Quality and Standards Agency (TEQSA). This on-campus bachelor’s degree (Perth campus only) is fully accredited by Engineers Australia under the Sydney Accord. It is internationally recognized under the International Engineering Alliance (IEA) accords and the various signatories.

Find out more about country-specific accreditation and professional recognition.

This course is classified as Level 7 under the Australian Qualifications Framework (AQF).

This course may use the following software:

  • Desmos online calculator  
  • Virtual Labs-Strength of Materials/Self-Compacting Concrete/Building Materials Virtual Lab
  • Autodesk Inventor 
  • MATLAB 
  • Python 3.10 
  • CodeBlocks C/C++ IDE 
  • Repl.it (Cloud IDE) 
  • Ansys Fluent  
  • AutoCAD / Excel 
  • Solidworks 
  • Pipeflow  
  • Excel / AustPADS 
  • MS Project 
  • Autodesk Revit 
  • Autodesk Navisworks 
  • PowerFactory 
  • LabView 
  • ANSYS 
  • Inventor 
  • Additional Mandatory Units 
  • Python Jupyter Notebook 
  • Google Colab  
  • Automation Studio 
  • Inventor 
  • Ansys workbench 
  • Pytorch 
  • KNIME 
  • Apache Mahout 
  • National Instruments 
  • ELVISmx Instrument Launcher (on Remote Lab) 
  • National Instruments Multisim (on Remote Lab) 
  • MechAnalyser 

Due to ongoing unit and course reviews, software may change from the list provided. Learn more about the Practical Learning at EIT here

Potential job roles include engineering and management positions in the following areas of expertise:

  • Civil and structural planning, design and development
  • Building contracts, sales, commissioning and consultation
  • Building control and surveying
  • Site management
  • Water and waste management
  • Civil and structural operations and maintenance
  • Civil and structural project management and business development

Our bachelor’s degrees take three years to complete full-time. Full-time students will spend approximately 40 -50 hours per week on study .This includes learning the program material, completing assessments and attending tutorials.

Applications are open for our upcoming intake. You must submit your application at least four weeks before the start date to be considered for your desired intake.

A census date is the date at which an enrolment is considered to be final. Any withdrawal you make after the study period census date will incur an academic penalty (for example, a fail grade) and a financial penalty (for example, no refund of your student contribution or tuition fees). See our current census dates.

Any student has a right to appeal a decision of the Engineering Institute of Technology (EIT) or any member of the institute’s staff. EIT has a comprehensive Policy on Appeals and Grievances to assist students.

Hear from our students

  Studying with EIT is one of the most important milestones in my life because it opened up a whole new world to me.  
S Senevirathna, Australia
  EIT was always there for the students to assist in every possible way in the tough times especially in terms of education and always encouraging students to be positive in the tough times which we had.  
  EIT has a different feel because it is a small community, so you have easy access to management. Any difficulties or challenges they are really there to help you with what you need  
V Onoja, Nigeria
  When I arrived in Australia, I was a little bit nervous about my studies but EIT provided a very good, friendly environment.  
A Singh, India

Why EIT?

We are one of the only institutes in the world specializing in engineering.

Industry Orientated Programs Icon Industry-Oriented Programs
Leaders in Industry Icon Industry Experienced Lecturers
Australian Accredited Icon World-Class Australian Accredited Education
Technology Careers Unique Delivery Model